CHEMCLAD P4C is a two component, water borne, polymeric ‘adhesion enhancer’ specifically formulated to help seal concrete/ cementitious surfaces and insure optimum interface bonding between the surface and the ENECON High Performance Polymer System selected as the finish coat.
Brush loose dirt from the surface to be coated and remove all oil, grease and other contaminants using a solvent which leaves no residue such as acetone, MEK, isopropyl alcohol, etc.
Clean and roughen the area of repair by abrasive blasting, steam cleaning, pressure washing or other suitable means.
After removing all surface and sub-strate contamination, flush the area thoroughly and allow to dry completely.
MIXING AND APPLICATION
Combine the two components and mix thoroughly until a uniform, streak-free, off white color is achieved.
Apply the mixed CHEMCLAD P4C to the surface using a brush or roller. Coat the area thoroughly but DO NOT flood or pool the CHEMCLAD P4C.