| |
- Transmission LineFault Analyser
- Tower Footing Earth Impedence
- DC Earth Fault Locator
- Insulation Tester
- Earth Tester
- SF6 Leak Detector System
- Corona Camera
MAX - Series
Virtual patrolling and decoding the inhomogeneities of entire transmission line
Transmission Line Fault Analyser System is one of its kind innovative product from Taurus, based on principle of multiple pulse co-relation technology using advanced matrix processors. With its unique features and capabilities these are ideal choice for the virtual patrolling and identifying all type of faults and inhomogeneities of entire transmission line.
EHT – 1250 MAX – 3 Digi Scan
MAX – 3 Digi Scan is an auto-calibrated portable system comprising of 5 main units: Fault Locator unit; Adapter unit; Signature Analyser unit; Simulator unit; Computing System loaded with Taurus Data Management Software (TADMA). The system being a portable kit can be used on any de-energised line from 66kV to 1250kV.
Applications:
- Used for Fault Location & Analysing
- Used for Predictive Maintenance
- Used for Pre–charging verification
- Used for Pre-commissioning of EHT lines
Salient Features:
- Fault & Line Diagnostics – Complete fault information in digital display
- Types of Faults – All type of open/short circuit faults and categories of inhomogeneities detected.
- Fault Resolutions - ±100 meters throughout the range of 1000kms
- Line Signature Analysis Study (LSA) - Useful in: Line Diagnostic Study Monitoring.
Other Available Models:
- ACCUMAX – 3: Transmission Lines analysis
- HD 1720 APEX – D: For HVDC Transmission Lines analysis.
|
|
PREZIOHM TFR 54 HF
PREZIOHM TFR is one of the innovative products of TAURUS, specially designed system to measure the earth impedance of transmission towers. PREZIOHM is a highly rugged testing instrument performs accurately in all conditions.
PREZIOHM TFR are high Frequency Earth Analyser, used to measure the power systems ability to discharge transient energy in to ground whilst minimizing earth potential rise, ensuring the equipment and personnel are safe from any danger. It is one of the important factors in determining the effectiveness of a lightning or surge protection system.
Salient Features:
- Fall of Potential method of earth resistance measurement.
- Portable system that uses High frequency impulse measurement technique to measure earth impedance which enables the user to test the system without isolating the ground wire of the tower and also the testing can be carried out even when the line energised.
- High dynamic measurement range of 0.01Ω to 20kΩ.
- Accuracy ±2%,
- Direct reading in digital display.
- Complete suppression of induction and leakage power frequency & its harmonics.
- Modular with in-built rechargeable battery.
|
|
DIGITRACE
DIGITRACE series is one of the innovative products of TAURUS, specially designed for DC floating system in substations. DIGITRACE is an intelligent sensing system, precisely identifies and tracks the complex faults of any DC floating system.
The task of identifying the faulty cores in DC floating system and isolating them from the source consumes amount of time and effort, to simplify the process of identifying faults in DC floating systems, Taurus DC Earth Fault Locator come handy and it can provide you complete solution for DC floating system.
DIGITRACE is an auto-calibrated portable system comprising of two main units: Main unit with the transmitter; Fault Guide Receiver unit. The system being a portable kit connected to the DC bus when required.
Salient Features :
- The faults is sensed immediately on connecting the system & accurately detects
- Clear indication of the cable which is faulty
- Faults upto 400kΩ can be detected
- Immune to high frequency noise interface & its harmonics
- Faults upto a distance of 1km as standard can be detected and as a optional 3km
- Fault point tracking with handy fault guide.
- Light and portable kit.
Available Models :
- DIGITRACE DC 361 – PY - For Range 0 – 30kΩ
- DIGITRACE DC 361 – PX - For Range 0 - 60kΩ
- DIGITRACE DC 361 – P - For Range 0 - 100kΩ
- DIGITRACE DC 451 – P - For Range 0 - 400kΩ
|
|
OHMEGA IT
OHMEGA – IT insulation tester is one of the innovative products of TAURUS, specially designed system to operate in a highly induced environment condition of substations. OHMEGA - IT is a microprocessor based system performs accurately in all conditions.
OHMEGA – IT is an auto-calibrated portable system capable of testing insulation resistance of power lines; underground cables; switch gears; bus bars; transformers and capacitors etc.
Salient Features :
- Continuously adjustable input voltage
- Automatic PI index computing
- Automatic DAR-Di-electric absorption ratio computing
- Upgrade to 20TΩ range
- PC interfacing
- Printing option
Available Models :
Taurus manufactures range of insulation testers for different applications
- OHMEGA – IT 5A – Voltage Range 0 - 5kV; Resistance Range Upto 20TΩ
- OHMEGA – IT 10A - Voltage Range 0 - 10kV; Resistance Range Upto 20TΩ
- OHMEGA – IT 15A- Voltage Range 0 - 15kV; Resistance Range Upto 20TΩ
- OHMEGA – IT 25A - Voltage Range 0 - 25kV; Resistance Range Upto 20TΩ
- OHMEGA – IT 30A - Voltage Range 0 - 30kV; Resistance Range Upto 20TΩ
OHMEGA – IT 25A can be used for measuring insulation resistance of Railways traction lines.
|
PRECIOHM ET
PRECIOHM ET is one of the innovative products of TAURUS, specially designed system to measure the earth resistance and resistivity of power stations equipments. PRECIOHM ET is a highly rugged testing instrument performs accurately in all conditions.
PRECIOHM ET is an auto-calibrated portable system capable of measuring the earth resistance and resistivity of entire electrical equipments in the power stations, casings of machines, switches and circuit breakers, lead sheathing and armouring of cables, tanks of transformers etc
Salient Features :
- Fall of Potential method of earth resistance & resistivity measurement
- High dynamic measurement range of 0.01Ω to 20kΩ
- Accuracy ±2%,
- Direct reading in digital display
- Complete suppression of induction and leakage power frequency & its harmonics
- Modular with in-built rechargeable battery
Available Models:
- PRECIOHM ET – 46S – Resistance, Range 0 to 20kΩ
- PRECIOHM ET – 46D – Resistance and Resistivity, Range 0 to 2kΩ
|
ION SCIENCE SF6 Leak Detector System
ION Science SF6 Leak Detector systems are revolutionary, award winning range of SF6 gas leak detectors ensure incredibly fast detection at ultra sensitive levels. The smallest of SF6 gas leaks can be detected and measured swiftly, with a minimum detection level of 1 x 1-7 ml/sec or optional 1 x 10-8 ml/sec.
Rapid detection and measurement of SF6 leaks with non-radioactive source helping to reduce emissions and protect the environment
SF6 Leak Detector systems are manufactured by Ion Science, UK. Ion Science manufactures a range of technologically advanced gas detectors, gas leak detectors, mercury monitors and corrosion monitors. Taurus Powertronics Systems is authorized business partners of Ion Science for India & South Asian market.
Available Product Range:
Portable SF6 Gas Leak Detector:
These are designed for the location, leak testing and measurement of SF6 gas in high voltage electrical switchgear and many other leak detection applications. This instrument has none of the problems of registration, storage and transportation associated with instruments based on the radioactive source ECD principle, which also require high purity and high pressure Argon gas. Data Storage and printing at the touch of a button. Although designed for SF6 in switchgear other gases with a high affinity for electrons, such as refrigerant R12 may also be detected.
- ION Science SF6 GasCheck P1 - Portable SF6 Gas Leak Detector
- ION Science SF6 LeakCheck P1:p - Portable SF6 Gas Leak Detector.
Fixed SF6 Gas Leak Detector:
Designed for fixed continuous SF6 area monitoring, the AreaCheck P2 with 12 point network controller rapidly detects low-level SF6 leaks.
- ION Science SF6 AreaCheck P2 - Fixed SF6 Gas Leak Detector
Application includes:
- SF6 leak testing and measurement in high voltage switchgear (GIS)
- Breathing apparatus testing
- Medical device testing
- Leak integrity testing on medical, refrigeration and air conditioning equipment containing SF6 and (H)CFCs
|
Diagnostic Imaging / UV Inspection Cameras
Corona Camera series is the most sensitive bi-spectral visible-UV detection apparatus with absolute solar blind performance and with high pinpointing resolution. These cameras are partial discharge non destructive and non intrusive (NDT) testers for the electrical industry, that provide solutions for maintenance and predictive maintenance of transmission lines, distribution, substations, generators, rotors, as well as for research and for testing laboratories.
Corona cameras are for daytime use, and designed as such to assist companies reduce allocated costs, increase systems stability and maintain reliability.
Corona Camera family of products detect corona/arcing in full daylight, Corona Camera systems provide utilities with a wide range of solutions at various stages of their operations
Key Features :
- Playback function for the captured images and videos.
- Fit for inspection under any light and weather conditions
- Manual and Automatic focus for both UV and Visible channels
- Zooming capability of both UV and Visible
- Integration mode for larger signals and reduced background noise
- Blob counting and display for evaluation of the corona strength
- Reporting software
- One-touch button functions operations; no need for menu browsing
- Multi lingual display - optional
- UV only, Visible only and Combined UV + Visible modes
- Accessories: GPS, title editor, voice recording, remote control
Corona Camera Superb:
Superb is the most sensitive bi-spectral Visible-UV detection apparatus with absolute solar blind performance and with high pinpointing resolution.
Added Features include:
- High brightness high resolution VGA colored LCD
- Still image capturing function, JPG format
Corona Camera Classic:
Classic is a solar blind bi-spectral imaging system is the most sensitive device that pinpoints surface faint UVc emissions in full daylight, used mainly by research institutes, high voltage testing labs, academies etc.
Corona Camera Rom:
Rom is a complete airborne inspection system in a gyro stabilized gimbals. The imaging system includes the corona camera and combinations of a High Definition TV camera with a range of IR cameras of the best existing brands. With the gyro stabilized gimbaled payload high speed remote detection of corona and arcing is possible.
Corona Camera Ranger
A professional vehicle mounted stabilized UV inspection systems that integrate the Corona Camera daytime corona detection technology with highly precise pan and tilt unit, enabling the user to control the system form inside the vehicle. Designed to streamline long lines inspection, provide comfort and retain high resolution images and straight forward reports.
Corona Camera Rail
A professional railway UV inspection system that incorporates the Corona Camera daytime corona detection technology with shock absorbers and rugged designed to enable high speed automatic detection of corona and arcing, provide high resolution images and straight forward report.
Corona Camera UVolle – Series
UVolle is the lightest daylight corona camera specially designed to be handy and ready for daily use by distribution and substations maintenance teams. It is a bi-spectral UV-Visible imager set for inspection, detection and capture of nearby corona and arcing phenomena in full daylight.
UVolle Models
- Corona Camera UVolle – S a compact daytime corona camera for still pictures
- Corona Camera UVolle – SV a compact daytime corona camera for stills and video clips
|
|
| |
| |
|