• Used for Fault Location & Analysing
• Used in Fault Identification and Fault Isolation
• Used for Predictive Maintenance
• Used for Pre–charging verification
• Used for Pre-commissioning of HT lines

• Fault & Line Diagnostics – Complete fault information given in digital display, accurate fault location in kilometers.
• Types of Faults – All type of open/short circuit faults and categories of inhomogeneities detected.
• Fault Isolations: Normally the online fault indicators (IKI Overhead) are installed in sectional/T-off locations in all the three phases this will quickly identify the faulty section to be isolated.
• Fault Resolutions - ±50 meters throughout the range of 100kms
• Line Signature Analysis Study (LSA) - Useful in: Line Diagnostic Study Monitoring.

• SIGMA – 3A: Without online fault indicator units

DIGITRACE

DIGITRACE series is one of the innovative products of TAURUS, specially designed for DC floating system in substations. DIGITRACE is an intelligent sensing system, precisely identifies and tracks the complex faults of any DC floating system.

The task of identifying the faulty cores in DC floating system and isolating them from the source consumes amount of time and effort, to simplify the process of identifying faults in DC floating systems, Taurus DC Earth Fault Locator come handy and it can provide you complete solution for proper maintenance DC floating system.

DIGITRACE is an auto-calibrated portable system comprising of two main units: Main unit with the transmitter; Fault Guide Receiver unit. The system being a portable kit connected to the DC bus as and when required on line.

• The faults is sensed immediately on connecting the system & accurately detects
• Clear and accurate indication of the cable which is faulty
• Faults upto 400kΩ can be detected
• Immune to high frequency noise interference & its harmonics
• Faults upto a distance of 1km as standard can be detected and as a optional 3km
• Fault point tracking with handy fault guide.
• Light and portable kit.

• DIGITRACE DC 361 – PY - For Range 0 – 30kΩ
• DIGITRACE DC 361 – PX - For Range 0 - 60kΩ
• DIGITRACE DC 361 – P - For Range 0 - 100kΩ
• DIGITRACE DC 451 – P - For Range 0 - 400kΩ

OHMEGA IT

OHMEGA – IT insulation tester is one of the innovative products of TAURUS, specially designed system to operate in a highly induced environment condition of substations. OHMEGA - IT is a microprocessor based system performs accurately in all conditions.

OHMEGA – IT is an auto-calibrated portable system capable of testing insulation resistance of power lines; underground cables; switch gears; bus bars; transformers and capacitors etc.





Salient Features :

• Automatic 60 seconds IR recording
• Continuously adjustable input voltage
• Automatic PI index computing
• Automatic DAR-Di-electric absorption ratio computing
• Upgrade to 20TΩ range
• PC interfacing
• Printing option
• 100 readings memory

• OHMEGA – IT 5A – Voltage Range 0 - 5kV;
• OHMEGA – IT 10A - Voltage Range 0 - 10kV;
• OHMEGA – IT 15A- Voltage Range 0 - 15kV;
• OHMEGA – IT 25A - Voltage Range 0 - 25kV;
• OHMEGA – IT 30A - Voltage Range 0 - 30kV;

PRECIOHM ET - Series

PRECIOHM ET is one of the innovative products of TAURUS, specially designed system to measure the earth resistance and resistivity of power stations equipments. PRECIOHM ET is a highly rugged testing instrument performs accurately in all conditions.

PRECIOHM ET

PRECIOHM ET is an auto-calibrated portable system capable of measuring the earth resistance and resistivity of entire electrical equipments in the power stations capable of suppressing effects of induction present in a substation & nullifies the influence of leakage frequencies in the earthmat.


Salient Features :

• Fall of Potential method of earth resistance & resistivity measurement
• High dynamic measurement range of 0.01Ω to 20kΩ
• Accuracy ±2%,
• Direct reading in digital display
• Complete suppression of induction and leakage power frequency & its harmonics
• Modular with in-built rechargeable battery

• PRECIOHM ET – 46S – Resistance, Range 0 to 20kΩ
• PRECIOHM ET – 46D – Resistance and Resistivity, Range 0 to 2kΩ
• 4p Models also available to check soil resistivity

ION SCIENCE SF6 Leak Detector System

ION Science SF6 Leak Detector systems are revolutionary, award winning range of SF6 gas leak detectors ensure incredibly fast detection at ultra sensitive levels. The smallest of SF6 gas leaks can be detected and measured swiftly, with a minimum detection level of 1 x 1-7 ml/sec or optional 1 x 10-8 ml/sec.

Rapid detection and measurement of SF6 leaks with non-radioactive source helping to reduce emissions and protect the environment

SF6 Leak Detector systems are manufactured by Ion Science, UK. Ion Science manufactures a range of technologically advanced gas detectors, gas leak detectors, mercury monitors and corrosion monitors. Taurus Powertronics Systems is authorized business partners of Ion Science for India & South Asian market.

Available Product Range:

Portable SF6 Gas Leak Detector:
These are designed for the location, leak testing and measurement of SF6 gas in high voltage electrical switchgear and many other leak detection applications. This instrument has none of the problems of registration, storage and transportation associated with instruments based on the radioactive source ECD principle, which also require high purity and high pressure Argon gas. Data Storage and printing at the touch of a button. Although designed for SF6 in switchgear other gases with a high affinity for electrons, such as refrigerant R12 may also be detected.

• ION Science SF6 GasCheck P1 - Portable SF6 Gas Leak Detector
• ION Science SF6 LeakCheck P1:p - Portable SF6 Gas Leak Detector.

• ION Science SF6 AreaCheck P2 - Fixed SF6 Gas Leak Detector

• SF6 leak testing and measurement in high voltage switchgear (GIS)
• Breathing apparatus testing
• Medical device testing
• Leak integrity testing on medical, refrigeration and air conditioning equipment containing SF6 and (H)CFCs

Diagnostic Imaging / UV Inspection Cameras

Corona Camera series is the most sensitive bi-spectral visible-UV detection apparatus with absolute solar blind performance and with high pinpointing resolution. These cameras are partial discharge non destructive and non intrusive (NDT) testers for the electrical industry, that provide solutions for maintenance and predictive maintenance of transmission lines, distribution, substations, generators, rotors, as well as for research and for testing laboratories.

Corona cameras are for daytime use, and designed as such to assist companies reduce allocated costs, increase systems stability and maintain reliability.



Corona Camera family of products detect corona/arcing in full daylight, Corona Camera systems provide utilities with a wide range of solutions at various stages of their operations

Key Features :

• Playback function for the captured images and videos.
• Fit for inspection under any light and weather conditions
• Manual and Automatic focus for both UV and Visible channels
• Zooming capability of both UV and Visible
• Integration mode for larger signals and reduced background noise
• Blob counting and display for evaluation of the corona strength
• Reporting software
• One-touch button functions operations; no need for menu browsing
• Multi lingual display - optional
• UV only, Visible only and Combined UV + Visible modes
• Accessories: GPS, title editor, voice recording, remote control

• High brightness high resolution VGA colored LCD
• Still image capturing function, JPG format

• Corona Camera UVolle – S a compact daytime corona camera for still pictures
• Corona Camera UVolle – SV a compact daytime corona camera for stills and video clips

Fault Passage Indicators

Over headline-Failure Detector IKI-Overhead

IKI – Overhead are products of Kries-Energietechnik GmbH & Co. KG, it’s a Germany based company focused on failure detecting systems for distribution lines; We Taurus Powertronics System is authorized business partners of Kries-Energietechnik GmbH & Co. KG.

Fault Passage Indicators are useful for Failure Detecting and Condition-Monitoring in Power-Distribution Networks.

IKI-Overhead allows:

Short-circuit and earth-fault detection in overhead line networks. With secondary sources (e.g. wind energy converters). Display of first and second alarm event without any change of settings, requirement: automatic re-closure. .

• Over current detecting in radial and closed loop networks
• Earth-fault detecting and
• Broken overhead line detecting

• PONLINE-Butler: Remote terminal units - The PONLINE-Butler is designed for use in ring main units and substations of power distribution networks. The transmission of messages and the reception of commands are possible via SMS.

• PONLINE-Master: Central reception, visualization, storage and processing of condition and failure messages from Remote terminal units. PONLINE-Butler, which are installed in the distribution network.

I/V Indicator

Kries-Energietechnik GmbH & Co. KG is Germany based company focused on failure detecting systems for distribution lines; We Taurus Powertronics System is authorized business partners of Kries-Energietechnik GmbH & Co. KG. Voltage and Current Indicators are useful for Failure Detecting and Condition-Monitoring in Power-Distribution Networks:

• Voltage detecting and monitoring systems for high-voltage.
• Earth-fault-direction-detecting.
• Short-circuit- and earth-fault-detecting
• Solutions for distribution network automation
• Remote transmission systems
• Power storage units

• IKI-10light: Earth Fault detector.

• IKI-20: Short-circuit / earth-fault indicator with current monitor

• IKI-30:IDMT / DT Protection relay.

• IKI-10EDI:Earth fault detection indicator.

• IKI-EDI-W:Earth fault transient relay.

• CAPDIS-S1+:Integrated Capacitive voltage detection system.

• CAPDIS-S2+:Integrated Capacitive voltage detection system with relay controls.

• CAPDIS-PI:Capacitive voltage detection system for retrofit.

• CAPDIS-M/4:Voltage measuring and monitoring/replacement for voltage transformers.

• CAP-Phase:Universal Combined phase comparator and voltage detector.

• VOIS+:Voltage detection system for high voltage.

• Power Storage Unit: Supply of load breaker or power circuit breakers without batteries.